1GLC300Cu-25, Graphene on Lacey Carbon, 300 Cu, 1 layer
Graphene on Lacey Carbon 300 Mesh Copper TEM Grids
Low magnification TEM image of single-layer graphene on lacey carbon film. Typical grain
size is in the region of 2-3 µm
size is in the region of 2-3 µm
Graphene TEM support films are supported by a lacey carbon film on a 300 mesh copper TEM grid.
CAS No. 7782-42-5
Characteristics
- Four thicknesses of CVD graphene
- Available in either 1, 2, 3-5 or 6-8 layers
- TEM Substrate
- Lacey carbon support film on 300 mesh copper TEM grid
- Graphene coverage of the TEM grid is better than 75%
Appearance
The graphene film appears as a near-transparent to light-grey film on the surface of the Lacey Carbon mesh on a red-brown colored copper TEM grid.
€1,070.10
SKU
EMS_1GLC300Cu-25
Specifications
Type |
Thickness of the Graphene |
Transparency |
TEM Grid/AFM Substrate | Support Film |
| 1 Layer | ~0.35 nm | ~96.4% | 300 Mesh Copper Grid | N/A |
| 2 Layers | ~0.7 nm | ~92.7% | 300 Mesh Copper Grid | N/A |
| 3-5 Layers | 1.0-1.7 nm | ~85.8-90.4% | 300 Mesh Copper Grid | N/A |
| 6-8 Layers | 2.1-2.8 nm | ~78.5-83.2% | 300 Mesh Copper Grid | N/A |
1 Layer
| 1GLC300Cu-5 | Graphene on Lacey Carbon, 300 Cu | 5/pk |
| 1GLC300Cu-10 | Graphene on Lacey Carbon, 300 Cu | 10/pk |
| 1GLC300Cu-25 | Graphene on Lacey Carbon, 300 Cu | 25/pk |
| Manufacturer | Electron Microscopy Sciences |
|---|---|
| Size / Rxns Number: | No |
| Protocol & Manual | No |
| Technical Tips | No |
Write Your Own Review