71666-03, MINILIGHT SET 3 (71666-28/71665-51/71665-60/71665-55)
Light Guides
Portable Microscope, Ring Lights, and Light Guides
MiniLight
Constructed from the highest quality material and small as its name, this miniLight offers the most universal light source, handling many tasks that require a bright light but with a small foot print that fits into most locations.
miniLight components:
Lamp – Available with 1 or 2 W power LED in 3 models each producing 15°, 28°, and 42° light cones.
The miniLight's main component is the miniLamp. This is a small but powerful light source. It is able to brightly illuminate small areas with the following properties:
- Shines very bright on a small area
- Low dissipation loss – no hot parts
- Long life – lifetime of a LED is 50,000 hours
- Little power needed (1 watt)
- Adjustable intensity
- CE compatible
Gooseneck – For the mounting of the miniLight
- Flexible – easy to adjust
- Both ends come with different threads: one for the minilamp and one which connects to the base
- Made from brassand is anodized black
- End-to-end measures 184mm (172mm actual length)
Magnetic Base – For mounting the miniLight 
- Made from stainless steel with the magnet encased
- Threaded center for mounting the gooseneck or mounting bar
- Easily affixes to any magnetized surface
- Affix force is 64N
Steel Base – For mounting the MiniLight with a heavy base
- Stainless steel
- Threaded center for gooseneck or mounting rod
- Weight 450 g (1 lb)
- Measures: 65mm diameter x 18mm height
Mounting Rods – 
For mounting the miniLight in a stable position
- Made from stainless steel
- Easy to mount and adjust the lamp with adjustable joint
- Short rod to mount Lamp – Long Rod to mount to the Steel Base
Joint – Connect the Mounting Rods 
This joint is used to connect the mounting rod together in any angle, any position so the Lamp shines the way you want
- Very precisely made
- Anodized aluminum
- Knurled tighten screw
Power Supply 12V – to power the miniLight
Supply with international AC-plug for feeding miniLight lamp with a constant tension of 12Volts. It is characterized by the following properties:
- Input voltage 90-264VAC
- Input frequency 47-63Hz
- Output Voltage 12V
- Power 8W
- AC-Connector for EU, GB, US, AUS
- Operating temperature 0-40°
- Weight 135gr. (without AC-plug)
- Dimensions 69.2x43.3x29.8mm without AC plug
- International approval UL60950, EN60950, SAA, PSE, CE, FCC Part 15 Class B
Application
Some applications that the miniLight is ideal for:
- Micro-technical working places, mounting, inspection
- Micro-electrical assembly
- Microscope, microbiology, cell counting
- Block trimming, etc.
Technical Data:
| ML-10 Series | ML-20 Series | |
| Supply: | 110-230 VAC (12V (±30%) | 110-230 VAC (12V (±30%) |
| Currant cons.: | 150 mA@12V, | 300mA@12V |
| Power LED: | 1 Watt | 2 Watt |
| Flux lumen min.: | 91 lumens | 160 lumens |
| Flux lumen typical: | 100 lumens | 180 lumens |
| Temp. case: | <50°C @tamb=25°C | 65°C @tamb=25°C |
| Light cone:* | 15° / 28° / 42° | 15° / 28° / 42° |
| Fixation: | M6 ou D28 | M6 ou D28 |
| Dimensions: | 28mm Dia x 34mm L | 28mm Dia x 34mm L |
| Weight: | 40g | 40g |
| Accessory | power supply, steel base, magnetic base, gooseneck, fixation bare, joint | power supply, steel base, magnetic base, gooseneck, fixation bare, joint |
*Definition of light cone: Angle in which the intensity is on the border of the cone half than in the middle of the cone.
Attention:
Never look direct in the light of the lamp, otherwise you risk to injure your eyes
| Cat. # | Description | Power |
| 71665-01 | miniLight.ch Set 1. Includes: Light source 15°, Goosebeck, Power Supply, and Magnet Base | 1W |
| 71666-01 | 2W | |
| 71665-02 | miniLight.ch Set 2. Includes: Light source 28°, Gooseneck, Power Supply, and Steel Base | 1W |
| 71666-02 | 2W | |
| 71665-03 | miniLight.ch Set 3. Includes: Light source 42°, Mounting Rods, Joint, Power Supply, and Magnet Base | 1W |
| 71666-03 | 2W | |
| 71665-04 | miniLight.ch Set 4. Includes: Light source 28°, Mounting Rods, Joint, Power Supply, and Steel Base | 1W |
| 71666-04 | 2W | |
| 71665-05 | Complete Set. Includes: all three Light Sources 15, 28 & 42°, Gooseneck, Mounting Rods, Joint, Power Supply, Magnet Base, and Steel Base. | 1W |
| 71666-05 | 2W |
Ordering:
| Components | ||
| 71665-15 | miniLight Light Source, 15° Light Cone | 1W |
| 71665-28 | miniLight Light Source, 28° Light Cone | 1W |
| 71665-42 | miniLight Light Source, 42° Light Cone | 1W |
| 71666-15 | miniLight Light Source, 15° Light Cone | 2W |
| 71666-28 | miniLight Light Source, 28° Light Cone | 2W |
| 71666-42 | miniLight Light Source, 42° Light Cone | 2W |
| 71665-50 | Gooseneck for Mounting miniLight | |
| 71665-51 | Stainless Steel Mounting Rod for Mounting miniLight | |
| 71665-52 | Joint – to joint the mounting rods | |
| 71665-55 | Magnetic Base | |
| 71665-56 | Steel Base | |
| 71665-60 | Power Supply | |
| Manufacturer | Electron Microscopy Sciences |
|---|---|
| Size / Rxns Number: | No |
| Protocol & Manual | No |
| Technical Tips | No |