S101H/4, Hybridisation bottle (300 x 40mm), 1 unit
Hybridisation bottles
| Model | Overall length | O.D | I.D | Wall thickness |
|---|---|---|---|---|
| SI20H/3 | 260mm | 40mm | 33.6mm | 3.2mm |
| SI20H/4 | 260mm | 75mm | 68.6mm | 3.2mm |
| SI20H/5 | 170mm | 40mm | 33.6mm | 3.2mm |
| Model | Description |
|---|---|
| SI30H | Hybridisation incubator / shaker supplied with 1 x rotisserie |
| SI20H/1 | Spare rotisserie for 7 x 40mm diameter bottles (holds 6 plus 1 in the centre) |
| SI20H/2 | Accessory rotisserie for 2 x 75mm diameter bottles |
€150.70
SKU
CPS_S101H/4
Hybridisation bottles
Bottle hybridisation minimises probe volumes, reduces reagent volumes and enhances signal intensity.
Made from Pyrex® borosilicate glass Stuart hybridisation bottles are robust and can easily withstand the temperatures of the most rigorous hybridisation techniques. The thermoplastic polyester caps are very rigid and will not distort during repeated heating in the incubator which can lead to leakage. The seal is made by a PTFE faced insert that covers the entire inside of the cap making very good contact with the glass thread.
Available in three sizes, each bottle comes complete with cap and a care leaflet.
Made from Pyrex® borosilicate glass Stuart hybridisation bottles are robust and can easily withstand the temperatures of the most rigorous hybridisation techniques. The thermoplastic polyester caps are very rigid and will not distort during repeated heating in the incubator which can lead to leakage. The seal is made by a PTFE faced insert that covers the entire inside of the cap making very good contact with the glass thread.
Available in three sizes, each bottle comes complete with cap and a care leaflet.
| Manufacturer | Cole-Parmer |
|---|---|
| Size / Rxns Number: | No |
| Protocol & Manual | N/A |
| Technical Tips | N/A |
Write Your Own Review